KDP, DKDP Kristalle

KDP, DKDP Kristalle

Show all
Transparency range 160 – 1800 nm (DKDP)
Dimensional tolerances +0/-0.1 mm
Length tolerance ±0.1 mm
Orientation accuracy of cut angle <30 arcmin
Surface quality 20-10 S-D
Surface flatness <λ/4 @ 632.8 nm
Parallelism error <20 arcsec
Perpendicularity <5 arcmin
Protective chamfers <0.1 mm x 45°
Material optical damage threshold >10 J/cm² for 10 ns pulses @ 1064 nm for KDP, >5 J/cm² for 10 ns pulses @ 1064 nm for DKDP
Crystals are also widely used for electro-optical applications as Q-switches for Nd:YAG, Nd:YLF, Ti:Sapphire and Alexandrite lasers, as well as for Pockels cells. The most commonly used electro-optical crystal is DKDP with a deuteration more than 98%. These crystals are grown by a water-solution method and can be grown up to very large sizes. Therefore, they are as low-cost and large-size finished non-linear components available. For frequency-doubling (SHG) and -tripling (THG) of Nd:YAG laser at 1064 nm, both type I and type II phase-matchings can be employed for Nonlinear single crystals KDP and DKDP. For frequency - quadrupling (4HG, output at 266 nm) of Nd:YAG laser KDP crystal is normally recommended.
We offer large aperture KDP crystals (up to 400x400mm and 10- 50mm length).
varna Good UV transmission
varna High optical damage threshold
varna High birefringence

Produkt bestellen

Es gibt kein Katalogeintrag für dieses Produkt. Mehr Information unter [email protected]

Kundenspezifisches Angebot

Wenn Sie erforderliche Spezifikationen für dieses Produkt nicht finden, bitte mit uns für individuelles Angebot in Kontakt treten.

Formular ausfüllen

Lagerware bestellen

Wählen aus 2 KDP, DKDP Kristalle